 |
|
(01-01) FLEXI - Dust, Fumes & Gases to 17’ - Internally Supported - 6.5'' Ø (650 CFM) & 8'' Ø (1000 CFM)
|
|
The FLEXI Extraction Arm is a superior extraction arm c/w an advanced design 'Parallelogram' counter balancing system that eliminates the need for continual adjustment of friction joints and allows for an un-paralleled ease of movement. The FLEXI is an ideal solution for most "source-capture" applications. It is also specifically recommended for applications requiring an "easy to position" extractor that does not require constant adjustment. The design is compact and smooth, excellent for areas with low ceiling. The FLEXI Extractor Arms come in four (4) lengths - 2m (7'), 3m (10’), 4m (14') & 5M (17') – and two (2) diameters – 160mm (6.5”) and 200mm (8”).
|
|
|
|
(01-05) Pro-Flex - All Applications to 30’ - Externally Supported - Diameter & Flow to suit
|
|
The externally supported PRO-FLEX Extraction Arm is a superior arm that comes complete with an advanced "parallelogram / counter balanced" design eliminationg the need for continual adjustment of friction joints and allowing for un-paralleled ease of use. The PRO-FLEX is an ideal solution for most "source-capture" applications. It is not just a stretched out extractor arm. Two ball-bearing mounted hoizontal arms with disc-brakes give an excellent horizontal maneuverability. It is also specifically recommended for applications requiring an "easy to position" extractor that does not require constant adjustment.
Pro-Flex Extractor Crane is the optimal solution when you need to cover large work areas. It come in 28 different configurations:
Lengths: 3M (10') -- 4M (14') -- 5m (17’) -- 6m (20') -- 7m (23’) -- 8m (26’) -- 9 m (30’)
Diameters: 100mm (4”) -- 125mm (5”) -- 160mm (6.5”) -- 200mm (8”).
|
|
|
|
(01-08) Super-Max - Stainless Steel to 14’ - Externally Supported - 4'' Ø (300 CFM) & 6.5'' Ø (650 CFM)
|
|
Stainless Steel Extraction arms with wall bracket. Parallelogram design. Steel hood with combined universal- and spinning-joint. Flameproof PVC hose 160mm (6.5”) Ø* with internal steel spiral. Adapted for central or individual extraction fan.
|
|
|
|
(01-09) H-MAX - Arm Extensions to 30’ - Externally Supported - 6.5'' Ø (650CFM) & 8'' Ø (1000 CFM)
|
|
The H-MAX Extension Boom is used to support single extraction arms in applications where you need to reach over long distances. The H-MAX Extension Boom has a ball bearing articulation in the wall bracket which enables a 180º movement.
|
|
|
|
(01-10) HERCULIAN Arm Extensions to 44’ - Externally Supported - 6.5'' Ø (650 CFM) & 8'' Ø (1000 CFM)
|
|
The HERCULIAN Articulating Extension Boom is designed to be used in applications where you need to reach over very long distances. The HERCULIAN Articulating Extension Boom can support any Pro-Flex Extraction Crane or H-MAX Articulating Extension Boom with a Flexi-I, Flexi-II or E-Z Arm at the end. The HERCULIAN Articulating Extension Boom has a ball bearing articulation in the wall bracket which enables a 180º movement.
|
|
|
|
(01-11) Accessories for Extraction Arms - Extension brackets, hoses, hood extensions…
|
|
Accessories for extraction arms such as:
Magnetic Nozzles
Hose extensions
Extension Hoods
Vehicle Exhaust accessories
Etc.
Products
Dual magnet holder bracket
|
|
|
|
(02-01) Mobi-Flex - Weld Fume, Dusts & Gases - 700 to 1,200 CFM - 6.5” Ø Extraction Arm
|
|
Mobile mechanical filter for welding fumes, grinding dust etc. Compact and flexible. The extraction arm captures fume and dust at a distance of 30-50 cm (12-20'') from the source and within an area of 0.5m (20'') diameter. Black hood w/ optimized airflow & ring handle & built in damper. Flame proof PVC hose 160mm (6.5”)Ø. This unit can also be fitted with an activated carbon filter which removes gases from polluted air.
FEATURES
Long Life --> All steel construction
Easy to maneuver --> Smallest "footprint" available
User friendly --> Counterbalanced extraction arm does not require constant adjustment
Low operating costs --> Washable or High capacity filter (300 ft2) filter
Multipurpose use --> Optional Carbon filters for Paint and VOC applications
|
|
|
|
(03-05) WF - Weld Fume, Dusts & Gases - Washable or disposable filters - 300 to 800 CFM - 6” Ø inlet
|
|
Wall-mounted mechanical filter unit c/w direct mount P-Max fan. The unit comes standard with a spun-bound polyester (washable). Designed for use with extraction arms, and/or ducted applications.
600 CFM @ 4" w.g.
|
|
|
|
(03-07) SSWC - Wet Collector Explosive Dusts - Self cleaning filter system built in - 800 to 3,000 CFM - 6/8/10/12” Ø inlets
|
|
The Stainless Steel Wet Dust Collection System from LEV-CO comes in a variety of models that are intended for safe, efficient collection of various dusts from sanding, grinding and deburring operations. Dust particles sink to the base of the tank and are easily racked into a disposal container using.
1. Dust suitable for wet collection includes:
o Quick wetting and sinking dust
o Materials of a combustible nature
o Applications where sparks may occur
o Applications where mixing of material and various minerals occur
o Other special applications.
2. Standard features
• No filter bags / Low maintenance
• Stainless steel construction
• Water level controller
• Sound silencer
• Magnetic starter, prewired with main disconnect
• T.E.F.C. motors
• Small particle grids for higher efficiency
• Models 1200 CFM to 5500 CFM
3. Optional equipment
• Explosion-proof motors
• Small particle filters
• Custom ductwork
• Automatic sludge removal systems
• Separator pumps
|
|
|
|
(04-01) L Series Vertically oriented cartridges Dust & Fume Collectors - Self cleaning filter system built in - 1,200 to 25,000 CFM
|
|
Our line of vertical cartridges dust collectors offer extremely efficient and economical systems due to the continuous venturi assisted reverse pulse jet cleaning system. The system allows on-line cleaning, without significant loading thus maintaining constant internal static pressure levels. This system is designed to handle 8" w.g. of external static pressure.
|
|
|
|
(11-09) NOMEX - Ducted - Volatile Organic Compounds & Coolant applications involving 100% Oil (No emulsions) - Vertical Profile (Taller than wide) - Max Door Opening: 14/27/54 ft ² (600/1,200/2,400 CFM)
|
|
The NOMEX© mechanical oil mist filter has a degree of separation of 95% of oil mists and up to 99.99% @ 0.3 microns of smoke with HEPA filters. These filter boxes have a large filtration area, are washable and are made of fiberglass media with aluminum separators.
|
|
|
|
(12-01) Clean Air 200 Series - Weld Fume - Washable and/or Disposable filters - (125 & 250 CFM)
|
|
At 37 lbs., these light weight units will go anywhere. Designed for use in confined spaces and areas where portability is a must. The one-man portable unit quickly removes harmful airborne smoke and particulate from the breathing and work zone through the 10' flexible hose and positioning arm with magnetic base. The large selection of filter combinations allow these units to effectively capture and remove airborne smoke, dust, fumes, grit or other contaminants from welding and other industrial processes.
Our 73-100G unit is designed for use with the smokeless welding torches and lighter duty applications for collection of dust and smoke at the source. Polluted air is drawn away and filtered through a 3-stage filtration system.
The 73-200G industry benchmark air cleaning unit collects dust and smoke at the source. Polluted air is drawn away and filtered through a 3-stage filtration system. The dual powered fan system assures consistent and effective performance. The side selection of filter combinations allow the unit to be used in a variety of applications.
|
|
|
|
(13-01) BI Direct Drive - Self Cleaning Wheels - Inverter Duty - (1,000 - 21,000 CFM)
|
|
Direct Drive Fans, Arr. #4 c/w punched flanged outlet, slip fit inlet, motor, motor mounting support and drain. Motors are TEFC E-Pact 230-460V/575-600V/3/60/-3500 RPM. Wheels are heavy gauge, single thickness, backward inclined, dynamically balanced to ANSI S2.19-1989 specifications for smooth operation.
NB: All Lev-Co LD fans come in a standard configuration of Clockwise rotation / Up-blast discharge. For alternate rotations and discharges, please indicate on your purchase order and approved submittal drawings
|
|
|
|
(13-03) P-Max - Direct Mount to Arms, Hose Reels... - (200 - 2,200 CFM)
|
|
P-Max© "Local Exhaust" fans. Recommended for applications involving fume, smoke and light dust. Suitable for direct mounting to a mounting bracket, most extraction arms, filter units, hose reels and simple hose drops.
NB: All Lev-Co P-max fans come in a standard configuration of Clockwise rotation / Top horizontal discharge. For alternate discharges, please indicate on your purchase order and approved submittal drawings. Alternate rotation is not available.
|
|
|
|
(13-04) Portable P-Max - Optional Hose, Nozzles... - (600 -1,500 CFM)
|
|
P-Max© "Portable Local Exhaust" fans. Recommended for applications involving vehicle exhuast gases, welding fumes, smoke and light dust. An excellent portable solution where a fixed mounted system is not possible. These fans are designed specifically for "Medium Pressure" applications where the fan must be able to overcome the air resistance created when drawing contaminants through hoses.
|
|
|
|
(13-05) Wall Fan - General Ventilation - Horizontal Discharge - (1,400 - 5,500 CFM)
|
|
Model AX1V fans are sturdily constructed, direct drive, horizontal discharge for industrial,
commercial and farm applications. Suitable for general ventilation of factories, garages,
warehouses and other commercial and industrial buildings.
Standard Features
- Aluminum housing
- Plated steel OSHA motor mount/guard
- Single or variable speed operation
- Aluminum fan blades on steel hub
- Totally enclosed motors
|
|
|
|
(13-07) Non Tempered (Neither heated or cooled) Make-Up Air - Low Cost Make Up Air - (5,000 - 30,000 CFM)
|
|
LEV-CO’s Non-Tempered Air Make-Up Systems replaces exhausted air more efficiently and with more comfort than conventional Air Make-Up air systems.
These Non-Tempered units consists of a THERMOSTAT controlled modulating air-mixing unit complete with motorized dampers that allow air to be drawn from OUTSIDE or INSIDE depending on the desired indoor temperature.
Aided by custom engineered flame retardant fabric distribution ducting, this solution is able to take advantage of the STRATIFIED heat in ceiling, creating the equivalent of lowering a conventional thermostat by ½ degree F per foot of ceiling height.
This is accomplished by discharging the air in HIGH velocity air jets as close to the ceiling as possible. The result of the mixing is that the fresh air is heated to room temperature very quickly before it reaches the lower occupied area.
When no fresh air is needed, the system can be shut down and the outside air dampers will close automatically or the system can be run on one hundred percent (100%) re-circulated air.
|
|
|
|
(14-01) Vehicle Exhaust (Car, truck, motorcycle, Heavy equip.) Single Extractor w/ strap - 4''/5”/6”/8” dia. (300/475/700/1,200 CFM)
|
|
Vehicle exhaust single extractor system c/w saddle and strap suspension support. Available in both Low Temp. as well as High Temp Hose.
Low Temp. Hose: suitable for temperatures up to 250º F
High Temp. Hose: suitable for temperatures up to 600º F.
|
|
|
|
(14-02) Vehicle Exhaust (Car, truck, motorcycle, Heavy equip.) Single Extractor w/ pulley kit - 4''/5”/6”/8” dia. (300/475/700/1,200 CFM)
|
|
Vehicle exhaust single extractor system c/w rope, pulley kit and saddle. Available in both Low Temp. as well as High Temp Hose.
Low Temp. Hose: suitable for temps. up to 250º F
High Temp. Hose: suitable for temps. up to 600º F
|
|
|
|
(14-03) Vehicle Exhaust (Car, truck, Heavy equip., etc) Single Extractor w/ balancer - Hose dia.& flowrates to suit application
|
|
Vehicle exhaust single extractor system c/w hose, balancer and saddle. Available in both Low Temp. as well as High Temp Hose.
Low Temp. Hose: suitable for temperatures up to 250º F.
High Temp. Hose: suitable for temperatures up to 600º F.
Ultra High Temp Hoses: suitable for temperatures from 750 to 2000º F.
|
|
|
|
(14-04) Vehicle Exhaust (Car, truck, motorcycle, Heavy equip.) Hose Reel - Spring Recoil - 4''/5”/6”/8” dia. (300/475/700/1,200 CFM)
|
|
The spring recoil hose reels are designed for removing exhaust gas emitted by exhaust pipes of every type of vehicle (cars, trucks, tractors, armored vehicles and means of public transport). They are perfect for bus depots, garages or service stations. They may be mounted under a roof as well as in a wall, supporting column or at the end of an extension boom.
The hose is lowered manually against spring tension. The reel is equipped with a locking catch, which locks the reel at the required position. A further pulling of the hose releases the locking catch and then the hose reels automatically. Available in both Low Temp. as well as High Temp Hose.
Low Temp. Hose: suitable for temperatures of 300º F
High Temp. Hose: suitable for temperatures of 600º F
|
|
|
|
(14-05) Vehicle Exhaust (Car, truck, motorcycle, Heavy equip.) Hose Reel - Motorized - 4''/5”/6”/8” dia. (300/475/700/1,200 CFM)
|
|
The electric - driven hose reels are designed for removing exhaust gas emitted by exhaust pipes of every type of vehicle (cars, trucks, tractors, armored vehicles). They are perfect for bus depots, garages, service stations and repair shops. One universal hose reel allows to attach and to reel the hoses of a different diameter and length. The reel is slide bearing mounted in the side plates of its supporting frame. There is a tubular electric motor with gear inside the reel. The reel may be mounted under a roof as well as in a wall or at the end of an extension boom. Available in both Low Temp. as well as High Temp Hose.
Low Temp. Hose: suitable for temperatures up to 250º F
High Temp. Hose: suitable for temperatures of 600º F
|
|
|
|
(14-07) Vehicle Exhaust (Car, truck, motorcycle, Heavy equip.) Articulating Crane for Hoses - 4'' to 24'' dia. (300 to 18,000 CFM)
|
|
The VE Articulating Crane Drops allows you to position the Hose Drop on any side of the vehicle and to fold the extraction system against the wall and out of the way. The Articulating Crane will reach as far as 10m (33.5') into the service bay and pass over the top of heavy equipment with ease.
Low Temp. Hose: suitable for temperatures up to 250º F
High Temp. Hose: suitable for temperatures of 600º F
Ultra High temperatures available up to 1200º F
"Dyno" hoses for temperatures up to 2500º F
|
|
|
|
(14-08) Portable VES Fan (500-1500 CFM)
|
|
w
|
|
|
|
(16-02) OM-AB-260 Urethane Hose - Oil Mists and Abrasive dusts (260°F)
|
|
Ideally suited for conveying oil mist from machining processes and many applications where a flexible, chemical and abrasion resistant hose is required. Wire reinforced, very flexible and clear. Minimum 5 times wear life improvement over PVC and TPR.
|
|
|
|
(16-03) LT-300 Vehicle Exhaust Hose - Vehicle Emissions (300°F) GPH
|
|
This hose is well suited for low temp vehicle exhaust gases, medium duty dust collection and a variety of fume applications where external abrasion resistance is required (e.g.: dragging the hose across the floor.) Santoprene coated polyester fabric w/wire reinforcement. Spring steel wire w/ external wear strip. Temp range of – 60 F to 300 F.
|
|
|
|
(16-04) HRHT-600 Vehicle Exhaust - Vehicle Emissions Hose reels (600°F) SNH
|
|
An all around high temperature fume control duct and superior flex fatigue resistance of nomex. This duct is ideal for use in constant flexing applications or with hose reels.
|
|
|
|
(16-05) LWHT-600 Vehicle Exhaust Hose - Vehicle Emissions Light Weight (600°F) SFH1
|
|
Silicone Fiberglass duct suitable for high temperature 600°F vehicle exhaust control.
1 ply Silicone/Fiberglass Hose
2 plies for added service life. A popular style for stationary high temperature exhaust control applications. *Not for use with garage hose reels
|
|
|
|
(16-06) MWHT-600 Vehicle Exhaust Hose - Vehicle Emissions Medium Weight (600°F) SFH2
|
|
Material
hose wall: two-layers, inner and outer layer special-coated high temperature fabric
external helix: galvanized steel
Processes
• Hot air
• Suction plants
• Vehicle Exhaust
|
|
|
|
(16-07) HWHT-600 Vehicle Exhaust Hose - Vehicle Emissions High Weight (600°F)
|
|
Material
hose wall: two-layers, inner and outer layer special-coated high temperature KEVLAR fabric
external helix: galvanized steel
Processes:
• Hot air
• Suction plants
• Vehicle Exhaust
|
|
|
|
(16-08) HWHT-750 Hose Vehicle Exhaust Hose - Vehicle Emissions High Weight (600°F)
|
|
MD-Master-Clip HT 750
Material
hose wall: special-coated high temperature fabric, asbestos free, reinforced by woven in stainless steel wire
external helix: galvanized steel
Processes
• Hot air
• Suction plants
• Furnace
|
|
|
|
(16-09) HWHT-1000 Vehicle Exhaust Hose - Vehicle Emissions High Weight (1000°F)
|
|
MD-Master-Clip HT 1000
High temperature Silicon coated glass fabric asbestos free reinforced in galvanized or stainless steel wire. Excellent high temp resistance hose high flexibility can handle up to 1000 degrees. Temp range – 5° F to 1000° F. Suitable for vehicle exhaust systems; high temperature diesel exhaust.
Material
hose wall: special-coated high temperature fabric, asbestos free, reinforced by woven in stainless steel wire
external helix: galvanized steel
|
|
|
|
(16-10) FE-600 Vehicle Exhaust Hose - Vehicle Emissions / Fume extractors (600°F)
|
|
Material
hose wall: silicon-coated glass fabric
external helix: galvanized steel
Applications
• Hot air
• Extraction equipment
• Vehicle
|
|
|
|
(16-20) ECH-260 - Electrically Conductive Hoses - Explosive Dusts and Vapours (260°F)
|
|
MD-Master-Pur L-EC
Material
hose wall: Electrically Conductive POLYURETHANE
spiral: PU-coated spring steel wire
Applications
• Dangerous areas, where electrical conductivity is demanded
• Special hose for industrial vacuum cleaners
• Suction and transport of paper fibers and wood chips
• Transport of granules
• Suction and transport of abrasive materials, gaseous and liquid media
• Extraction of coarse-grained particles with high flow volume
• Oil-spray extraction
• Protection hose against mechanical damage
Properties
• Surface resistance RO<=104 Ohm
• Electrically conductive
• Abrasion-resistant
• Very flexible, lightweight
• Small bend radius
• Resistant to oil and fuels, gas-tight
• Free of plastizisers and halogens
• Good chemical resistance
• UV- and ozone-resistant
• Improved pressure and vacuum characterisitics
• High tensile and burst strength
• Optimum flow characteristics
|
|
|
|
(16-21) Quick Lock
|
|
Modular ducting systems
|
|
|
|
(16-25) Hose Accessories
|
|
Hose Accessories
|
|
|
|
(16-30) Abrasion Resistant Hose
|
|
Material
hose wall: 100% pure polyester polyurethane. 30% more abrasion-resistant than polyether polyurethane
spiral: PU-coated spring steel wire
Applications
• Suction and transport hose for abrasive materials
• Solid, Gaseous and liquid media
• Suction of paper and textile fibers
• Transport of small particled dusts and powders
• Oil-spray extraction
• Protection hose against mechanical pressure
Properties
• Highly abrasion-resistant
• Resistant to oil and fuels
• Gas-tight
• Good chemical resistant
• Free of plastizisers and halogens
• UV- and ozone-resistant
• Lightweight
• Extremely flexible
• Small bend radius
• High tensile and burst strength
• Smooth inside, for optimum flow characteristics
• Electrically conductive by grounding spiral
|
|
|
|
(17-05) Quick Lock Elbow
|
|
Quick lock capable elbow at various angles connectable with quick lock clamps
|
|
|
|
(17-06) Quick Lock Flange Adapter
|
|
Angle flange suitable for quick lock ductwork end
|
|
|
|
(17-07) Quick Lock Pipes
|
|
Pipe sections with end beads for quick connection
|
|
|
|
(17-07) Quick Lock Slip Joint
|
|
Slip joint for quick lock style ductwork
|
|
|
|
(17-07) Quick Lock Standard Clamp
|
|
Make the connection between any two quick lock compatible elements
|
|
|
|
(17-09) Installation Accessories
|
|
LEV-CO Installation Quote Form
|
|
|
