 |
|
(04-01) L Series Vertically oriented cartridges Dust & Fume Collectors - Self cleaning filter system built in - 1,200 to 25,000 CFM
|
|
Our line of vertical cartridges dust collectors offer extremely efficient and economical systems due to the continuous venturi assisted reverse pulse jet cleaning system. The system allows on-line cleaning, without significant loading thus maintaining constant internal static pressure levels. This system is designed to handle 8" w.g. of external static pressure.
|
|
|
|
(04-015) LEV-RP Rotopulse Series Dust Collectors
|
|
Our line of horizontal cartridges dust collectors offer extremely efficient and economical systems due to the roto-pulse jet cleaning system. The system allows on-line cleaning, without significant loading thus maintaining constant internal static pressure levels.
Aavailable with hopper and barrel (standard) or tray (low profile configuration).
|
|
|
|
(04-02) DC-4 Horizontally oriented cartridges Fume & Dust Collector - Self cleaning filter system built in - 1,000 to 2,400 CFM
|
|
Cartridge dust collector w/(4) Clean 2® filters, front load, 3 HP motor/blower with AMCA Type B spark resistant aluminum blower wheel, 4.25 ft3, 11” deep removable dust pan, and auto-clean Vibra-Pulse® cleaning system, with ˝” regulator. These collectors are ideal for most dust and smoke applications and they are especially recommended for harsh applications such as Laser & Plasma cutting or "Oily" weld smoke applications.
|
|
|
|
(04-03) DC-6 Horizontally oriented cartridges Fume & Dust Collector - Self cleaning filter system built in - 1,500 to 3,600 CFM
|
|
Cartridge dust collector w/(6) Clean 2® filters, front load, 3 HP motor/blower with AMCA Type B spark resistant aluminum blower wheel, 4.25 ft3, 11” deep removable dust pan, & auto-clean Vibra-Pulse® cleaning system with ˝” regulator. These collectors are ideal for most dust and smoke applications and they are especially recommended for harsh applications such as Laser & Plasma cutting or "Oily" weld smoke applications.
|
|
|
|
(04-04) DC-8 Horizontally oriented cartridges Fume & Dust Collector - Self cleaning filter system built in - 2,000 to 4,800 CFM
|
|
Cartridge dust collector with (8) Clean 2® filters, front load, 5 HP motor/blower with AMCA Type B spark resistant aluminum blower wheel, and auto clean Vibra-Pulse® cleaning system with ˝” regulator. Motor starters not included These collectors are ideal for most dust and smoke applications and they are especially recommended for harsh applications such as Laser & Plasma cutting or "Oily" weld smoke applications.
|
|
|
|
(04-05) DC-12 Horizontally oriented cartridges Fume & Dust Collector - Self cleaning filter system built in - 3,000 to 7,200 CFM
|
|
Cartridge dust collector with (12) Clean 2® filters, front loading, 5 HP motor/blower with AMCA Type B spark resistant blower wheel, and auto clean Vibra-Pulse® cleaning system with ˝” regulator. Motor starters not included. These collectors are ideal for most dust and smoke applications and they are especially recommended for harsh applications such as Laser & Plasma cutting or "Oily" weld smoke applications.
|
|
|
|
(04-06) DC-18 Horizontally oriented cartridges Fume & Dust Collector - Self cleaning filter system built in - 4,500 to 10,800 CFM
|
|
Cartridge dust collector with (18) Clean 2® filters, 5 HP motor/blower and block-off Vibra-Pulse® filter cleaning. Motor starters/disconnects not included. These collectors are ideal for most dust and smoke applications and they are especially recommended for harsh applications such as Laser & Plasma cutting or "Oily" weld smoke applications.
This unit has been designed to be placed outside including having the top panels angled to shed water. An access panel has been added to both sides of the clean air plenum to allow for easier maintenance on the block-off components, if needed. The cabinet also has a modular design to support multiple module units (DC-36, DC-54, etc.)
|
|
|
|
(04-061) CF-ECO
|
|
Self Cleaning system
|
|
|
|
(04-07) F1-HWF Wet Collector - Explosive Dusts - Self cleaning filter system built in - 1,000 to 15,000 CFM
|
|
HYDROTRON Water Filter Dust Collectors purify air by a combination of centrifugal force and violent mixing of water and contaminated air. As the air stream passes the fixed baffles, particulate is separated by heavy, turbulent curtain of water created by high velocity air. The centrifugal force caused by the rapid changes in airflow direction forces the dust particles to penetrate the water droplets and become entrapped. Contaminated water is then removed from the airstream by special mist filters. Dust, as sludge, settles to the collector bottom and the water is reused.
The HYDROTRON is specifically designed for safe collection of potentially explosive and volatile materials and is effective in the capture of fine metal particles. It meets the National Fire Protection Association guidelines for processing and finishing aluminum. Since the Hydrotron also meets OSHA and NFPA regulations for dust removal located inside buildings, it can recirculate in-plant, tempered air to conserve energy.
|
|
|
|
(04-08) F1-CF1 Cyclotron (size/flow to suit)
|
|
The CYCLOTRON combines a long tapered cone, a high velocity inlet, and a large internal helix to easily separate from the air stream all moderate size particles, such as saw dust chips and particles from metal grinding. The CYCLOTRON fans are positioned on the clean air side of the cyclone and are direct drive for low maintenance. In addition, the fans have backward inclined blower wheels for high efficiency and low noise operation.
Optional Safety After Filters ensure that even the smallest particles are captured. Standard filter material for the after-filters is 16-ounce seared, felted polyester, designed to hold large dust particles to the outer edges, thus forming a filter cake which heightens filtering efficiency and facilitates easy removal.
|
|
|
|
(04-09) F1-BT Bagtron (size/flow to suit)
|
|
LEV-CO’s Bagtron series of units filter fine to moderate-sized particles and provide on-line filter cleaning for uninterrupted dust collection. Designed for use on dust which is curly, sticky, long fibers, abrasive, forest products, food products (hydroscopic), making these materials difficult to self clean from cartridges. Industries benefiting from this technology include paper products, concrete production, food processing, forest products and aircraft parts manufacturing. Other processes for this equipment include sanding, chipping, planning, bailing, processing, blasting and cutting. The Bagtron is used on fine to medium particulate; heavy loading; wood, metal plastic and composites; particles that present special problems, including wood or metal shavings, hydroscopic dust and paper shreds.
|
|
|
|
(04-11) WELDMAX Rotopulse (size / flow to suit)
|
|
Sef-Cleaning Rotopulse Cartridge dust collector series.
Aavailable with hopper and barrel (standard) or tray (low profile configuration).
|
|
|
