MINI-FLEX EXTRACTION ARM

01-099

Soldering, gluing and Laboratories

Mini-FLEX extraction arms are designed to extract smoke, gas and light dust from soldering, grinding, gluing and laboratory work.

Easy to move

Modern parallelogram technology is the secret. The d.100mm arm is extremely easy to move and still retains its position. The extractor hood can be angled more than 110 in all directions.

Bench Top mounting

Mini-FLEX can be mounted standing on top of a table with a hole through the table or at the edge of the table with the included table bracket. Turning flange 360. Outlet with 3.15in. inside for Mini-FLEX d=3in. and outlet d=4in. inside for Mini-FLEX d=4in. is included.

Wall or ceiling mounting

Mini-FLEX can be mounted on the wall or in the ceiling with the included standard bracket. 360 turning flange. Outlet with 3.15in. inside for Mini-FLEX d=3in. and outlet d=4in. inside for Mini-FLEX d=4in. is included.

30 Years Experience

30 years experience of construction and production are at your disposal! The LEV-CO extraction systems are a combination of well tested solutions and new ideas.
LEV-CO is always a step ahead, but not expensive.