model_icon
(01-041) ME Lab & Bench Top - Externally Supported - 2'',3'',4'' Ø **
ME is a local extractor with friction joints designed for use in workplaces where great flexibility is required
e.g. laboratories and production environments in lighter industrial applications.



Simple, easy function
The friction joints have a large frictional diameter and are
supported with ball bearings. The degree of friction is
easily adjusted with a one-hand knob. Adapted support
springs balance out the weight of the arm. All arms are
equipped with a 360 degree rotational swivel mounted in
place. An air tight damper is fitted as standard.



Always easy to select the right product
The ME is available in four versions:
- Standard version. Suitable for evacuation of most types
of airborne contaminants.


- PP version. Most suitable for evacuation of highly
corrosive contaminants in high concentrations.


- ESD version. For ESD environments, type approved to
EN 61340-5-1.


- ATEX version. For ATEX classed environments, as in
directive 94/9/EC category 2, for gases and dust.



The ME is available in sizes 50, 75 and 100 mm.



All sizes are suitable for table mounting, ceiling mounting and wall mounting.


The same suction arm is used for suspended mounting from ceilings and walls.


Ceiling and wallbrackets consists of anodised square section aluminium profile for high finish and good stability.



The 050 and 075 sizes use the same brackets, while the 0100 size has its own selection of brackets. All ceiling brackets are available in eight standard lengths up to 2 m. Longer lenghts can be supplied to special orders.
To further simplify your mounting and provide a neat finish, escutcheon plate MTI CT can be used if it is nessary to cut holes in the false ceiling.



There are six hoods adapted for ME 50 & 75 and four specially adapted hoods for ME 100.
A suitable air flow is from 20 l/s to 125 l/s.
75 m /h - 450 m /h .



The ME system is design protected with several patents- and design protections pending.

001 - Spec Drawings:
Z-Table mounting with standard anodized aluminum tubes
Part # Description
MEB 1000-75 3" Diameter x 40" Long fume extractor arm with anodized aluminum tubes and 5" diameter polypropylene joints. Table mounted version including a manual damper.
MEB 1300-75 3" Diameter x 51" Long fume extractor arm with anodized aluminum tubes and 5" diameter polypropylene joints. Table mounted version including a manual damper.
MEB 1500-75 3" Diameter x 60" Long fume extractor arm with anodized aluminum tubes and 5" diameter polypropylene joints. Table mounted version including a manual damper.
Z-Wall mounting, complete with wall bracket and standard anodized aluminum tubes
Part # Description
MEV 1000-75 3" Diameter x 40" Long fume extractor arm with anodized aluminum tubes and 5" diameter polypropylene joints. Complete with wall mounting bracket and a manual damper.
MEV 1300-75 3" Diameter x 51" Long fume extractor arm with anodized aluminum tubes and 5" diameter polypropylene joints. Complete with wall mounting bracket and a manual damper.
MEV 2000-75 3" Diameter x 80" Long fume extractor arm with anodized aluminum tubes and 5" diameter polypropylene joints. Complete with wall mounting bracket and a manual damper.
MEV-1500-75 3" Diameter x 60" Long fume extractor arm with anodized aluminum tubes and 5" diameter polypropylene joints. Complete with wall mounting bracket and a manual damper.
Z-With external gas spring wall mounting, complete with wall bracket
Part # Description
MEVS 1500-75-PP 3" Diameter x 60" Long fume extractor arm with polypropylene tubes and 5" diameter polypropylene joints. Complete with wall mounting bracket, manual damper and an external gas spring.
MEVS 1500-75-PP-ESD-EX 3" Diameter x 60" Long fume extractor arm with black carbon impregnated polypropylene conductive tubes and 5" diameter polypropylene joints. Complete wit wall mounting a manual damper and an external gas spring. The arm grounds static electricity to its grounding point. Certified according to standard EN 61340-5-1 and is in compliance with ATEX directive 94/9/EC for category 2 gases and dusts.
MEVS 2000-75-ESD-EX 3" Diameter x 80" Long fume extractor arm with black carbon impregnated polypropylene conductive tubes and 5" diameter polypropylene joints. Complete wit wall mounting a manual damper and an external gas spring. The arm grounds static electricity to its grounding point. Certified according to standard EN 61340-5-1 and is in compliance with ATEX directive 94/9/EC for category 2 gases and dusts.
MEVS 2000-75-PP 3" Diameter x 80" Long fume extractor arm with polypropylene tubes and 5" diameter polypropylene joints. Complete with wall mounting bracket, manual damper and an external gas spring.
Z-Table mounting with polypropylene tubes and joints
Part # Description
MB 1900-100-EX 4" Diameter x 76" Long fume extractor arm with black carbon impregnated polypropylene conductive tubes and 5" diameter polypropylene joints. Includes a manual damper. The arm grounds static electricity to its grounding point. Certified according to standard EN 61340-5-1 and is in compliance with ATEX directive 94/9/EC for category 2 gases and dusts.
MEB 1000-75-PP 3" Diameter x 40" Long fume extractor arm with polypropylene tubes and 5" diameter polypropylene joints. Table mounted version including a manual damper.
MEB 1300-75-PP 3" Diameter x 51" Long fume extractor arm with anodized aluminum tubes and 5" diameter polypropylene joints. Table mounted version including a manual damper.
MEB 1500-75-PP 3" Diameter x 60" Long fume extractor arm with polypropylene tubes and 5" diameter polypropylene joints. Table mounted version including a manual damper.
Z-Wall mounting, complete with wall bracket, polypropylene tubes and joints
Part # Description
MEV 1000-75-PP 3" Diameter x 40" Long fume extractor arm with polypropylene tubes and 5" diameter polypropylene joints. Complete with wall mounting bracket and a manual damper.
MEV 1300-75-PP 3" Diameter x 51" Long fume extractor arm with polypropylene tubes and 5" diameter polypropylene joints. Complete with wall mounting bracket and a manual damper.
MEV 1500-75-PP 3" Diameter x 60" Long fume extractor arm with polypropylene tubes and 5" diameter polypropylene joints. Complete with wall mounting bracket and a manual damper.
MEV 2000-75-PP 3" Diameter x 80" Long fume extractor arm with polypropylene tubes and 5" diameter polypropylene joints. Complete with wall mounting bracket and a manual damper.
Z-Ceiling mounting with an external gas spring
Part # Description
METS 1500-75 3" Diameter x 60" Long fume extractor arm with anodized aluminum tubes and 5" diameter polypropylene joints. Ceiling mounted version including a manual damper and an external gas spring.
METS 1500-75-ESD-EX 3" Diameter x 60" Long fume extractor arm with black carbon impregnated polypropylene conductive tubes and 5" diameter polypropylene joints. Ceiling mounted version including a manual damper and an external gas spring. The arm grounds static electricity to its grounding point. Certified according to standard EN 61340-5-1 and is in compliance with ATEX directive 94/9/EC for category 2 gases and dusts.
METS 1500-75-PP 3" Diameter x 60" Long fume extractor arm with polypropylene tubes and 5" diameter polypropylene joints. Ceiling mounted version including a manual damper and an external gas spring.
METS 2000-75 3" Diameter x 80" Long fume extractor arm with anodized aluminum tubes and 5" diameter polypropylene joints. Ceiling mounted version including a manual damper and an external gas spring.
METS 2000-75-ESD-EX 3" Diameter x 80" Long fume extractor arm with black carbon impregnated polypropylene conductive tubes and 5" diameter polypropylene joints. Ceiling mounted version including a manual damper and an external gas spring. The arm grounds static electricity to its grounding point. Certified according to standard EN 61340-5-1 and is in compliance with ATEX directive 94/9/EC for category 2 gases and dusts.
METS 2000-75-PP 3" Diameter x 80" Long fume extractor arm with polypropylene tubes and 5" diameter polypropylene joints. Ceiling mounted version including a manual damper and an external gas spring.
Z-Table mounting for ESD and ATEX requirements
Part # Description
MEB 1000-75-ESD-EX 3" Diameter x 40" Long fume extractor arm with black carbon impregnated polypropylene conductive tubes and 5" diameter polypropylene joints. Table mounted version including a manual damper. The arm grounds static electricity to its grounding point. Certified according to standard EN 61340-5-1 and is in compliance with ATEX directive 94/9/EC for category 2 gases and dusts.
MEB 1300-75-ESD-EX 3" Diameter x 51" Long fume extractor arm with black carbon impregnated polypropylene conductive tubes and 5" diameter polypropylene joints. Table mounted version including a manual damper. The arm grounds static electricity to its grounding point. Certified according to standard EN 61340-5-1 and is in compliance with ATEX directive 94/9/EC for category 2 gases and dusts.
MEB 1500-75-ESD-EX 3" Diameter x 60" Long fume extractor arm with black carbon impregnated polypropylene conductive tubes and 5" diameter polypropylene joints. Table mounted version including a manual damper. The arm grounds static electricity to its grounding point. Certified according to standard EN 61340-5-1 and is in compliance with ATEX directive 94/9/EC for category 2 gases and dusts.
Z-Wall mounting, complete with wall bracket for ESD and ATEX requirements
Part # Description
MET 2650-100-EX 4" Diameter x 106" Long fume extractor arm with black carbon impregnated polypropylene conductive tubes and 5" diameter polypropylene joints. Ceiling mounted version including a manual damper. The arm grounds static electricity to its grounding point. Certified according to standard EN 61340-5-1 and is in compliance with ATEX directive 94/9/EC for category 2 gases and dusts.
MEV 1000-75-ESD-EX 3" Diameter x 40" Long fume extractor arm with black carbon impregnated polypropylene conductive tubes and 5" diameter polypropylene joints. Complete with wall mounting bracket and a manual damper. The arm grounds static electricity to its grounding point. Certified according to standard EN 61340-5-1 and is in compliance with ATEX directive 94/9/EC for category 2 gases and dusts.
MEV 1300-75-ESD-EX 3" Diameter x 51" Long fume extractor arm with black carbon impregnated polypropylene conductive tubes and 5" diameter polypropylene joints. Complete with wall mounting bracket and a manual damper. The arm grounds static electricity to its grounding point. Certified according to standard EN 61340-5-1 and is in compliance with ATEX directive 94/9/EC for category 2 gases and dusts.
MEV 1500-75-ESD-EX 3" Diameter x 60" Long fume extractor arm with black carbon impregnated polypropylene conductive tubes and 5" diameter polypropylene joints. Complete with wall mounting bracket and a manual damper. The arm grounds static electricity to its grounding point. Certified according to standard EN 61340-5-1 and is in compliance with ATEX directive 94/9/EC for category 2 gases and dusts.
Z-Ceiling mounting for ESD and ATEX requirements
Part # Description
MEHR-75-EX Hood Tube L ' 6", polypropylene and carbon impregnated
MEK 350-75-ESD-EX 14" diameter round domed hood, polypropylene and carbon impregnated
MEM 250-75-ESD-EX Black 10" diameter hood carbon impregnated
MEPH 300-75-ESD-EX Black Flat screen hood 12" x 8" polypropylene and carbon impregnated
MES 300-75-ESD Suction Nozzle L=12", complies with ESD requirements.
Main System / Part
Part # Description
MEK-351-100-PP Ø14" round domed hood polypropylene -complete with hood tube
MET 1000-75 3" Diameter x 40" Long fume extractor arm with anodized aluminum tubes and 5" diameter polypropylene joints. Ceiling mounted version including a manual damper.
MET 1500-50 2" Diameter x 60" Long fume extractor arm with anodized aluminum tubes and 5" diameter polypropylene joints. Ceiling mounted version including a manual damper.
MT 2100-100-PP 4" Diameter x 84" Long fume extractor arm with anodized aluminum tubes and polypropylene joints. Ceiling mounted version including a manual damper.
MVK-126 Wall bracket for 4" diameter arms. Includes a mounting plate 7 7/8" x 4 3/4"
Reducer
Part # Description
IN-RED-LIN-8-3 8 - 3 Duct Reducer
Wall, Table or Ceiling Bracket (1 Required)
Part # Description
MTI 1250 50" Long standard anodized aluminum ceiling bracket including a 4" side inlet and 7 7/8" x 7 7/16" mounting plate.
MTI 250 10" Long standard anodized aluminum ceiling bracket including a 4" side inlet and 7 7/8" x 7 7/16" mounting plate.
Hood
Part # Description
MEM 250-75 Metal hood 10" diameter, powder coated aluminum.
MES 300-50 2" Suction Nozzle L=12" in standard aluminum
MK 350-75 14" diameter round domed hood (PETG) material 3" arm.
Installation Accessories
Part # Description
MBF Flexible table bracket for 3" and 4" diameter extraction arms
 
Other Industries / Processes
As we understand that our products may need to be re-applied during their life span (+20 years), we have listed below other applications that this product can be used For. Before re-applying any of our solutions, please contact one of our representatives to confirm the suitability of your application.

Art - Lithography
Art - Screen Printing
Art - Stained Glass
Chemicals and Plastics Manufacturing - Pesticide Manufacturing
Chemicals and Plastics Manufacturing - Plastic Manufacturing
Chemicals and Plastics Manufacturing - Resin Manufacturing
Chemicals and Plastics Manufacturing - Rubber Manufacturing
Chemicals and Plastics Manufacturing - Soap Manufacturing
Computer and Electronic Product Manufacturing - Electronics Assembly Line
Dental Offices - Operating Room
Dental Offices - Procedure Room
Educational Facilities - Auto Shop
Educational Facilities - Chemistry Laboratories
Educational Facilities - Machine Shop
Educational Facilities - Welding Shop
Food & Beverage Manufacturing - Animal Food Manufacturing
Food & Beverage Manufacturing - Canning
Food & Beverage Manufacturing - Food Packaging Plant
Food & Beverage Manufacturing - Fruit Production
Forensics - Forensics Laboratories
Heavy and Farm Equipment Repair - Farm Equipment Repair
Heavy and Farm Equipment Repair - Heavy Equipment Repair
Machine Shop - Core Grinder
Machine Shop - Metal Polishing Belt
Marine - Hull Building
Mining and Quarrying - Drilling
Mining and Quarrying - Electromechanical Equipment
Miscellaneous Operations - Mortuary Table
Municipal Operations Center- DOT Garage - Service Garage-Vehicle Maintenance
Museums, Historical Sites, and Similar Institutions - Artifact Cleaning
Museums, Historical Sites, and Similar Institutions - Paleontology
National Defense - Military Vehicle Repair
Pharmaceutical - BioFarm - Pill Productions
Pharmaceutical - BioFarm - Prosthesis
Public Transportation - Bus Maintenance and Repair
Public Transportation - Subway Maintenance and Repair
Refineries and Energy - Renewable Energy Manufacturing
Vehicle Repair Garage - Buffing and Polishing
Vehicle Repair Garage - Cars & Small Trucks Repair
Vehicle Repair Garage - Motorcycles & ATV Repair
Welding Shops - Aluminum Welding
Welding Shops - Copper Alloy Welding
Welding Shops - Magnesium Welding
Welding Shops - Nickel Welding
Welding Shops - Stainless Welding
Welding Shops - Steel Welding
Welding Shops - Torch Cutting Ventilation
Woodworking - Chainsaw