model_icon
(11-02) MP4 - Direct machine mount - Self Draining Filters / Horizontal Profile (Wider than tall) - Max Door Opening: 7 ft ² (475 CFM)**
The Model MP4 is designed for single-unit metalworking applications. It produces from 475 CFM with 95% filtration efficiency. It features a 1" aluminum mesh pre-filter, a Mist-Plus main filter, and a 3/4 HP BI blower TEFC motor. It includes the new removal bottom sump with 1.5" drain, mounting angles to hang or surface mount, and a 6" bottom inlet only. For side, back or front inlet see INLET PLENUM. CONSTRUCTION:

18 ga. welded steel cabinet with powder-coat finish; includes quick release filter access door, Ultra-Seal filter mounting system, acoustically lined blower cabinet, power cord, on/off switch for 115 volt units, 230/1 phase and 3 phase units are wired to a side junction box.
001 - Spec Drawings:002 - Brochures:003 - Case Studies:004 - Videos:
006 - System Layouts:017 - DWG and RVT models:
Main System / Part
Part # Description
MP4-1 MP4 industrial air cleaner with a TEFC motor 115-230/1/60 Hz AS PER CANADIAN LAW; this unit is electrically approved by CSA/ESA field evaluation.
MP4-2 MP4 industrial air cleaner with a TEFC motor 208-230-460/3/60 Hz AS PER CANADIAN LAW; this unit is electrically approved by CSA/ESA field evaluation.
MP4-3 MP4 industrial air cleaner with a TEFC motor 575-600/3/60 Hz AS PER CANADIAN LAW; this unit is electrically approved by CSA/ESA field evaluation.
Filter Options (when ordering with main unit)
Part # Description
MP4-1P 1" Polyester Pad Option for Standard MP4 Unit
MP4-EXAD External adsorber module, 300 cfm, 12 lbs. capacity, with 2 polyester after-filter. Order charcoal separately.
MP4-EXDOP External 95% @ 0.3 micron DOP Option for Standard MP4 Unit
MP4-EXHE External HEPA, 99.97%, 300 cfm. For PG-6 use 2PG6-HEPA.
MP4-EXHE/AD External 99.97% @ 0.3 micron HEPA with external adsorber module, 18lbs. Capacity with 2 polyester after-filter, 275 cfm. Order charcoal separately.
Hose Clamps - ''Bridge style
Part # Description
MD-530-050-100 2 Ø Bridge Clamp. Clamping range of 50mm-70mm
  • Looking at screw, the threaded section goes to right.
  • MD-530-075-100 3 Ø Bridge Clamp. Clamping range of 70mm-90mm
  • Looking at screw, the threaded section goes to right.
  • MD-530-100-100 4 "Ø Bridge Clamp. Clamping range of 100mm-120mm
  • Looking at screw, the threaded section goes to the right.
  • MD-530-125-100 5 Ø Bridge Clamp. Clamping range of 120mm-140mm
  • Looking at screw, the threaded section goes to right.
  • MD-530-150-100 6 Ø Bridge Clamp. Clamping range of 150mm-170mm
  • Looking at screw, the threaded section goes to right.
  • MD-530-200-100 Clamping range of 200mm-220mm
  • Looking at screw, the threaded section goes to right.
  • Unit Retrofit Parts (for existing units)
    Part # Description
    MP4-HEPA-RTO To retro-fit MP4 unit with HEPA (99.97% @ 0.3 micron) after-filter option. Includes HEPA filter, top panel and mounting hardware.
    PG6-RTO Pressure Gauge Kit to retro-fit MP4 unit. Magnahelic guage 0-10
    Variable Frequency Drives
    Part # Description
    VFD-KIT-1HP-115-230-3 1HP 120-240V Hybrid VFD 1 Phase In, 230V 3 Phase Output 60Hz complete with:

  • VFD NEMA 4
  • 1 HP Motor
  • Wiring
  • Labor
  • Re-certification

  • PLEASE NOTE: this kit is only required when upgrading a 120V system with a VFD
  • VFD-KIT-2HP-115-230-3 2HP 120-240V Hybrid VFD 1 Phase In, 230V 3 Phase Output 60Hz complete with:

  • VFD NEMA 4
  • 2 HP Motor
  • Wiring
  • Labor
  • Re-certification

  • PLEASE NOTE: this kit is only required when upgrading a 120 or 220/1/60 V system with a VFD
  • VFD-KIT-3HP-220-230-3 3HP 240V Hybrid VFD 1 Phase In, 230V 3 Phase Output 60Hz complete with:

  • VFD NEMA 4
  • 3 HP Motor
  • Wiring
  • Labor
  • Re-certification

  • PLEASE NOTE: this kit is only required when upgrading a 120V system with a VFD
  • Fan Control Panels (when ordering main unit)
    Part # Description
    VFD-115V-3/4 Variable Frequency drive for 3/4HP 115/1/60Hz motor
    VFD-208/230V-3/4 Variable Frequency drive for 3/4HP 208-230/1-3/60Hz motor
    VFD-575V-3/4 Variable Frequency drive for 3/4HP 575/3/60Hz motor
    Hose Rings
    Part # Description
    HR-2-OM 2" dia. Hose Ring to connect oil mist hose to CNC machine
    HR-3-OM 3" dia. Hose Ring to connect oil mist hose to CNC machine
    HR-4-OM 4" dia. Hose Ring to connect oil mist hose to CNC machine
    HR-5-OM 5" dia. Hose Ring to connect oil mist hose to CNC machine
    HR-6-OM 6 dia. Hose Ring to connect oil mist hose to CNC machine
    HR-8-OM 8 dia. Hose Ring to connect oil mist hose to CNC machine
    Misc. Options (when ordering main unit)
    Part # Description
    2KT8-4124 L type bracket kit for mounting mist collector to the wall (2 required)
    LEV-PGH-MS-orange Pressure Gauge Holder-Mild Steel-orange
    Hose for Oil Mist
    Part # Description
    DM-113-02.0-104***SEE THERM- From Nova 2.0 Ø Master Pur-SL Hose. Super lightweight polyester/polyurethane w/wire reinforcement. Very flexible and clear. Minimum 5 times wear life improvement over PVC and TPR. Price per ft. (25' Length Minimum)
    DM-113-03.0-104 3 Ø Master Pur-SL Hose. Super lightweight polyester/polyurethane w/wire reinforcement. Very flexible and clear. Minimum 5 times wear life improvement over PVC and TPR. Price per ft. (25' Length Minimum)
    DM-113-04.0-104 4 Ø Master Pur-SL Hose. Super lightweight polyester/polyurethane w/wire reinforcement. Very flexible and clear. Minimum 5 times wear life improvement over PVC and TPR. Price per ft. (25' Length Minimum) 4" X 6' HANGING ON WALL CLEAR
    DM-113-05.0-104 5 Ø Master Pur-SL Hose. Super lightweight polyester/polyurethane w/wire reinforcement. Very flexible and clear. Minimum 5 times wear life improvement over PVC and TPR. Price per ft. (25' Length Minimum)
    DM-113-06.0-104 6 Ø Master Pur-SL Hose. Super lightweight polyester/polyurethane w/wire reinforcement. Very flexible and clear. Minimum 5 times wear life improvement over PVC and TPR. Price per ft. (25' Length Minimum)
    DM-113-08.0-104 8 Ø Master Pur-SL Hose. Super lightweight polyester/polyurethane w/wire reinforcement. Very flexible and clear.
  • Min 25' Lenght Price per ft. (25' Length Minimum)
  • Preventative Maintenance Pressure Gauges, etc. (when ordering main unit)
    Part # Description
    LEV-MC-PG-5 Pressure Gauge - complete with Wall, Ceiling or table mounting bracket and 0-5 pressure gauge. 3/16 inside diameter tubing ordered separately.
    PG-10 Pressure Gauge - complete with Wall, Ceiling or table mounting bracket and 0-10 pressure gauge. 3/16 inside diameter tubing ordered separately.
    MP4-PG-6 0-6 magna-helic pressure gauge, approximately 5 diameter size. Surface mounted.
    Installation Accessories
    Part # Description
    MT-24STANDKIT-MP4 'MT-24STANDKIT-MP4' 24 Stainless Steel Stand for MP-04
    MP-1.5DL 1.5 dia. Drain Loop kit c/w PVC pipe, fittings, ball valve and glue
    MP4-DL Drain loop kit. Includes 1.5 x 3/4 reducer fitted with 3/4 copper p-trap pipe with fittings and instructions.
    MP4-INLET PLENUM Inlet plenum with 6 inlet on any side, in place of standard removal bottom. Add 11 to height
    MP4-STAND-24 24 High Stand Option for Standard MP4 Unit
    MP4-STAND-5 5 High Stand Option for Standard MP4 Unit
    MP-SEAL Astroseal Sealant ( now called Pro-Seal)
    TUBING-3/4-CLEAR 3/4” I.D. Clear Plastic Tubing. Priced per foot.
    Replacement filters - (Quantity discounts available upon request)
    Part # Description
    Charcoal-CP40 40" lb of CP Blend of chemisorbant and activated carbon blend.

  • Target Contaminants:
  • Hydrocarbons
  • VOC's
  • Oxides of sulfur
  • Formaldehyde
  • Nitric Oxide
  • Hydrogen Sulfide
  • Lower molecular weight aldehydes and organic acids
  • 2AF7-3001 95% Mist-Plus Filter (1 required/ MP-4 unit)
  • Main Filter
  • 2AF7-3003 2 Polyester AFTER-filter for Mp-4 unit. Comes with Polyester pad and Frame.
    2AF7-3004 Adsorber Module Option for MP-4
    2AF7-3006 97% MIST-PLUS II filter, metal frame (1) required for MP-4 unit
    7FA8-0005 1 Aluminun Mesh Filter for MP4 Unit
  • Main Filter
  • 7FJ9-9007 HEPA filter for MP4 and MPH-8
     
    Other Industries / Processes
    As we understand that our products may need to be re-applied during their life span (+20 years), we have listed below other applications that this product can be used For. Before re-applying any of our solutions, please contact one of our representatives to confirm the suitability of your application.

    Aerospace - Surface Grinders
    Construction - Circular Saw
    Educational Facilities - Machine Shop
    Food & Beverage Manufacturing - Food Packaging Plant
    Machine Shop - Surface Grinder
    Machine Shop - Swing Grinder
    Marine - Deck Cleaning
    MetalWorking - Chip Collection
    MetalWorking - Mist Collection