model_icon
(11-04) MPH10 - Direct machine mount - Self Draining Filters / Horizontal Profile (Wider than tall) - Max Door Opening: 14 ft ² (1,000 CFM)**
The Mist-Pak® MPH10 low profile mist collector is designed to capture mist and smoke from various metalworking applications. The low profile design allows the unit to be installed directly above the machine tool in low ceiling applications. The collector produces up to 1000 CFM with 95%+ filtration efficiency for single or multiple machine tool collection systems. 16/18 Gauge welded steel cabinet with Powder-Coat finish. Unit includes a top filter access door, Ultra-Seal® filter mounting system, an acoustically lined blower cabinet with access panel, a bottom inlet collar, and a 10’ power cord. Three phase units wired to a junction box; circuit and motor overload protection by others.
001 - Spec Drawings:002 - Brochures:
Main System / Part
Part # Description
MPH10-500-1 500 cfm source capture mist collector with (3) MIST-PLUS II main filter with (2) MERV14 pleated synthetic, washable filters (17.5 x 18.5 x 3.75). 1/2 HP 115/1/60 Hz 77.5 dBA, with rubber vibration insulator, with a 10 collar on bottom. AS PER CANADIAN LAW; this unit is electrically approved by CSA/ESA field evaluation.
MPH-10-1000-1 1000 cfm source capture mist collector with (3) MIST-PLUS II main filter with (2) MERV14 pleated synthetic, washable filters (17.5 x 18.5 x 3.75). 1 HP 115/1/60 Hz 77.5 dBA, with rubber vibration insulator, with a 10 collar on bottom. AS PER CANADIAN LAW; this unit is electrically approved by CSA/ESA field evaluation.
MPH10-1000-2 1000 cfm source capture mist collector with (3) MIST-PLUS II main filter with (2) MERV14 pleated synthetic, washable filters. 1 Hp 208-230/460/3/60 Hz 77.5 dBA, with rubber vibration insulator, with a 10 collar on bottom. AS PER CANADIAN LAW; this unit is electrically approved by CSA/ESA field evaluation.
MPH-10-1000-3 1000 cfm source capture mist collector with (3) MIST-PLUS II main filter with (2) MERV14 pleated synthetic, washable filters (17.5 x 18.5 x 3.75). 1 HP 575/3/60 Hz 77.5 dBA, with rubber vibration insulator, with a 10 collar on bottom. AS PER CANADIAN LAW; this unit is electrically approved by CSA/ESA field evaluation.
Fan / Motor Upgrades or Options (when ordering main unit)
Part # Description
MPH 10-1/2HP 1/2 Hp, 115/1/60 Hz motor in place of 1 HP 115/1/60 Hz (500 cfm).
Variable Frequency Drives
Part # Description
VFD-KIT-1HP-115-230-3 1HP 120-240V Hybrid VFD 1 Phase In, 230V 3 Phase Output 60Hz complete with:

  • VFD NEMA 4
  • 1 HP Motor
  • Wiring
  • Labor
  • Re-certification

  • PLEASE NOTE: this kit is only required when upgrading a 120V system with a VFD
  • VFD-KIT-2HP-115-230-3 2HP 120-240V Hybrid VFD 1 Phase In, 230V 3 Phase Output 60Hz complete with:

  • VFD NEMA 4
  • 2 HP Motor
  • Wiring
  • Labor
  • Re-certification

  • PLEASE NOTE: this kit is only required when upgrading a 120 or 220/1/60 V system with a VFD
  • VFD-KIT-3HP-220-230-3 3HP 240V Hybrid VFD 1 Phase In, 230V 3 Phase Output 60Hz complete with:

  • VFD NEMA 4
  • 3 HP Motor
  • Wiring
  • Labor
  • Re-certification

  • PLEASE NOTE: this kit is only required when upgrading a 120V system with a VFD
  • Misc. Options
    Part # Description
    MPH 10-HANGING-CRADLE Bracket/Frame, with gasket to hang unit from ceiling.
    MPH 10-CART 18­­ cart with casters
    MPH 10-IA-FRONT Cover the bottom inlet, and install a 8" collar to FRONT ONLY of unit and install a drain loop, 1" x 3/4" reduce fitting with 3/4" copper p-trap pipe fittings and instructions.
    MPH 10-STAND-10 10 stand
    MPH10-BRACKET Bracket/Frame, with gasket to hang unit from ceiling.
    Misc. Options (when ordering main unit)
    Part # Description
    2KT8-4124 L type bracket kit for mounting mist collector to the wall (2 required)
    2KT8-4903 Kit, 10" stand.
    Preventative Maintenance Pressure Gauges, etc. (when ordering main unit)
    Part # Description
    LEV-MC-PG-5 Pressure Gauge - complete with Wall, Ceiling or table mounting bracket and 0-5 pressure gauge. 3/16 inside diameter tubing ordered separately.
    PG-10 Pressure Gauge - complete with Wall, Ceiling or table mounting bracket and 0-10 pressure gauge. 3/16 inside diameter tubing ordered separately.
    MPH 10-PG-5 0-5 Minihelic dial pressure gauge for MPH10. Specify Location or it will ship loose.
    MPH 10-PG-6 0-6 Minihelic dial pressure gauge for MPH10. Specify Location or it will ship loose.
    Replacement filters - (Quantity discounts available upon request)
    Part # Description
    2AF8-4900 Replacement Filter
    3FM8-4901 Media replacement PAK (MIST-PLUS™ II ) (3 Req'd)
    Charcoal-CP40 40 lb of CP Blend of chemisorbant and activated carbon blend.

  • Target Contaminants:
  • Hydrocarbons
  • VOC's
  • Oxides of sulfur
  • Formaldehyde
  • Nitric Oxide
  • Hydrogen Sulfide
  • Lower molecular weight aldehydes and organic acids
  • 7FJ9-9004 HEPA, 99.97% filter for MP-14, PR01, MPH5, MPH10.
    7FP1-4502 Filter pleated. Synthetic, Washable. MERV 15 efficiency.
    MPH 10-HEPA (2) Internal 99.97% HEPA filter. (17.5x18.5x4) In addition to main MIST-PLUS II filters
    PRO 1-2AF7-4000 97% MIST-PLUS II filter, metal frame (3) required.
     
    Other Industries / Processes
    As we understand that our products may need to be re-applied during their life span (+20 years), we have listed below other applications that this product can be used For. Before re-applying any of our solutions, please contact one of our representatives to confirm the suitability of your application.

    Aerospace - Surface Grinders
    Construction - Circular Saw
    Educational Facilities - Machine Shop
    Food & Beverage Manufacturing - Food Packaging Plant
    Machine Shop - Surface Grinder
    Machine Shop - Swing Grinder
    Marine - Deck Cleaning
    MetalWorking - Chip Collection
    MetalWorking - Mist Collection