model_icon
(03-07) SSWC - Wet Collector Explosive Dusts - Self cleaning/draining filter system built in - 1200 to 5,500 CFM**
The Stainless Steel Wet Dust Collection System from LEV-CO comes in a variety of models that are intended for safe, efficient collection of various dusts from sanding, grinding and deburring operations. Dust particles sink to the base of the tank and are easily racked into a disposal container using.



1. Dust suitable for wet collection includes:



o Quick wetting and sinking dust

o Materials of a combustible nature

o Applications where sparks may occur

o Applications where mixing of material and various minerals occur

o Other special applications.



2. Standard features



• No filter bags / Low maintenance

• Stainless steel construction

• Water level controller

• 1 Micron solid/liquid phase after filter

• Sound silencer

• Magnetic starter, prewired with main disconnect

• T.E.F.C. motors

• Small particle grids for higher efficiency

• Models 1200 CFM to 5500 CFM



3. Optional equipment



• Explosion-proof motors

• HEPA and Carbon filters

• Custom ductwork kits

• Single and Dual Extraction arms (6.5” to 12” diameter – 7’ to 17’ long)

• Portable option (Wheel kits)

• Custom direct mount Downdraft tables

• Water level controller
Standard Construction


  • Main Motor Main Motor --> 3 to 25 HP T.E.F.C., 220-440-575 V, 3 phase / 60 Hz


  • Main Tank --> Made of welded construction & properly ribbed stainless steel.


  • Baffles --> Designated for continuous water spray to filter contaminated air; made of stainless steel.


  • Eliminator Grid --> Standard to all units; increases efficiency and performance.


  • Water Level Float --> Adjustable float valve that monitors the machine water level; adjusts to keep optimum collector performance; made of brass.


  • Water Drain Valve --> 1 inch gate valve drains unit when cleaning; made of brass.


  • Water Level Scale --> Mounts in an easy to read location for water level monitoring.


  • Impeller --> Balanced to minimize vibration; made of stainless steel.


  • Miscellaneous Fittings & Hardware --> Prevents rusting; made of brass & stainless steel.


  • Electrical Equipment --> Push button motor starter and overload; wired to motor with water tight connectors and conduit; includes main disconnect switch
  • Main System / Part
    Part # Description
    SS-C3-1200 SS Wet Dust collector, 1200 CFM, Inlet Dia. 6 inches, motor 3 HP, 208-230/460 V/3/60 (other voltages also available) 25” W X 29” D x 60” H
    SS-C3-800 SS Wet Dust collector, 800 CFM, Inlet Dia. 6 inches, motor 3 HP, 208-230/460 V/3/60 (other voltages also available)
    SS-C40-15000 SS Wet Dust collector, 15000 CFM, Inlet Dia. 26 inches, dual 20 HP Motors, 460 V/3/60 (other voltages also available) 72"Wx59"Dx133"H, Welded SS Construction. Powder coated exterior. Two 2" dia drains.
    SS-C5-1800 SS Wet Dust collector, 1800 CFM, Inlet Dia. 8 inches, motor 5 HP, 208-230/460 V/3/60 (other voltages also available) 32"Wx38"Dx81"H, Welded SS Construction.
    SS-C5-1800-No Motor SS Wet Dust collector, 1800 CFM, Inlet Dia. 8 inches. 32"Wx38"Dx81"H, Welded SS Construction. Includes; extended sump, stainless steel cover and 10” flange, no impeller, no motor, latched removable hood, no powder coat on inlet or flange.
    SS-C5-2500 SS Wet Dust collector, 2500 CFM, Inlet Dia. 8 inches, motor 5 HP, 208-230/460 V/3/60 (other voltages also available)
    SS-C7-3000 SS Wet Dust collector, 3000 CFM, Inlet Dia. 10 inches, motor 7.5 HP, 208-230/460 V/3/60 (other voltages also available)
    SS-C7-3000-No Motor SS Wet Dust collector, 3000 CFM, Inlet Dia. 10 inches. Includes; extended sump, stainless steel cover and 12” flange, no impeller, no motor, latched removable hood, no powder coat on inlet or flange
    Filter Options (when ordering with main unit)
    Part # Description
    SS-C7-3000-EXHE External 99.97% HEPA Filter Option for SS-C7-3000 Wet Dust Collector
    Variable Frequency Drives
    Part # Description
    C5-1800 Control Panel VFD with transducer, flow switch, BAC monitoring and control, amperage, RPM, voltage, Hz monitoring, acceleration and deceleration time readouts.
    C7-3000 Control Panel Includes: VFD with transducer, flow switch, BAC monitoring and control, amperage, RPM, voltage, Hz monitoring, acceleration and deceleration time readouts.
    VFD-KIT-1HP-115-230-3 1HP 120-240V Hybrid VFD 1 Phase In, 230V 3 Phase Output 60Hz complete with:

  • VFD NEMA 4
  • 1 HP Motor
  • Wiring
  • Labor
  • Re-certification

  • PLEASE NOTE: this kit is only required when upgrading a 120V system with a VFD
  • VFD-KIT-2HP-115-230-3 2HP 120-240V Hybrid VFD 1 Phase In, 230V 3 Phase Output 60Hz complete with:

  • VFD NEMA 4
  • 2 HP Motor
  • Wiring
  • Labor
  • Re-certification

  • PLEASE NOTE: this kit is only required when upgrading a 120 or 220/1/60 V system with a VFD
  • VFD-KIT-3HP-220-230-3 3HP 240V Hybrid VFD 1 Phase In, 230V 3 Phase Output 60Hz complete with:

  • VFD NEMA 4
  • 3 HP Motor
  • Wiring
  • Labor
  • Re-certification

  • PLEASE NOTE: this kit is only required when upgrading a 120V system with a VFD
  • Misc. Options (when ordering main unit)
    Part # Description
    Wet-Col-Wheel 4" swivel caster with 1/2 threaded stem and brake, rate for 600 lbs.
    Accessories
    Part # Description
    COIL-2WAY COIL, 2 WAY,N.C,SING SOL,SPRING RET, 1/2"NPT PORTS
    COIL-BUSHJOST 12VDC COIL FOR BUSHJOST VALVE
    COIL-BUSHJOST-VALVE NORGREN COIL FOR BUSCHJOST VALVE 24 VDC
    COIL-BUSHJOST-VALVE-120 NORGREN COIL FOR BUSCHJOST VALVE 120/60
    Preventative Maintenance Pressure Gauges, etc. (when ordering main unit)
    Part # Description
    LEV-MC-PG-5 Pressure Gauge - complete with Wall, Ceiling or table mounting bracket and 0-5 pressure gauge. 3/16 inside diameter tubing ordered separately.
    PG-10 Pressure Gauge - complete with Wall, Ceiling or table mounting bracket and 0-10 pressure gauge. 3/16 inside diameter tubing ordered separately.
    Replacement filters - (Quantity discounts available upon request)
    Part # Description
    WSS2-50 18 X 27 X 1.875 Stainless Steel Filter
     
    Other Industries / Processes
    As we understand that our products may need to be re-applied during their life span (+20 years), we have listed below other applications that this product can be used For. Before re-applying any of our solutions, please contact one of our representatives to confirm the suitability of your application.

    Aerospace - Shot Blasting
    Art - Jewelry Manufacturing
    Art - Lithography
    Chemicals and Plastics Manufacturing - Pesticide Manufacturing
    Chemicals and Plastics Manufacturing - Plastic Manufacturing
    Chemicals and Plastics Manufacturing - Resin Manufacturing
    Computer and Electronic Product Manufacturing - Electronics Assembly Line
    Construction - Chainsaw
    Construction - Rock Drills
    Dental Offices - Procedure Room
    Educational Facilities - Auto Shop
    Educational Facilities - Chemistry Laboratories
    Educational Facilities - Machine Shop
    Educational Facilities - Welding Shop
    Educational Facilities - Wood Shop
    Food & Beverage Manufacturing - Animal Food Manufacturing
    Food & Beverage Manufacturing - Food Packaging Plant
    Forensics - Forensics Laboratories
    Heavy and Farm Equipment Repair - Farm Equipment Repair
    Heavy and Farm Equipment Repair - Heavy Equipment Repair
    Machine Shop - Abrasive Blasting Cabinet
    Machine Shop - Abrasive Cut-Off Saw
    Machine Shop - Core Grinder
    Machine Shop - Horizontal Double-Spindle Disc Grinder
    Machine Shop - Manual Buffing and Polishing
    Machine Shop - Metal Polishing Belt
    Machine Shop - Portable Chipping and Grinding Table
    Machine Shop - Straight Line Automatic Buffing
    Machine Shop - Swing Grinder
    Machine Shop - Tumbling Mills
    Machine Shop - Vertical Spindle Disc Grinder
    Marine - Hull Building
    Mining and Quarrying - Drilling
    Mining and Quarrying - Electromechanical Equipment
    Museums, Historical Sites, and Similar Institutions - Artifact Cleaning
    Museums, Historical Sites, and Similar Institutions - Paleontology
    National Defense - Military Vehicle Repair
    Paper and Leather Manufacturing - Paper Strengthening
    Pharmaceutical - BioFarm - Pill Productions
    Pharmaceutical - BioFarm - Prosthesis
    Pharmaceutical - BioFarm - Tablet Press Machine
    Process Engineering - Bucket Elevator Ventilation
    Process Engineering - Rubber Calender Rolls
    Public Transportation - Subway Maintenance and Repair
    Refineries and Energy - Petroleum Refining
    Robotics and Artificial Intelligence - Robot Manufacturing
    Welding Shops - Aluminum Welding
    Welding Shops - Copper Alloy Welding
    Welding Shops - Magnesium Welding
    Welding Shops - Nickel Welding
    Welding Shops - Stainless Welding
    Welding Shops - Steel Welding
    Welding Shops - Torch Cutting Ventilation
    Woodworking - Band Saw
    Woodworking - Circular Saw
    Woodworking - CNC Plastic Milling Machine
    Woodworking - Jointer
    Woodworking - Mortiser
    Woodworking - Planer
    Woodworking - Radial Arm Saw