Image for solution 1

Extraction Arms

Capture at Source Extraction Arms are used to capture airborne contaminants before the contaminants have a chance to reach the workers' breathing space.

Available in several different designs:
  • Internally Supported
  • Externally Supported
  • Telescopic
  • Mild or Stainless Steel Construction
  • Lengths: Up to 45'
  • 2.5" to 8" Diameter's Available
Typically the Extraction Arms are connected to a fixed extraction fan, Filter system or dust collector via direct mounting or a "Header Type" duct system.

For more info, please see the products and associated documentation listed below.
(01-01) FLEXI - DUST, FUMES & GASES TO 17’ - INTERNALLY SUPPORTED - 6.5'' Ø (650 CFM) & 8'' Ø (1000 CFM)**
Image for Model 829
“Ready to install and use” FLEXI Extraction Arm are excellent solutions for capturing Fumes and Dust at source and exhausting to atmosphere.

(01-011) SUPER FLEX© 6.5'' Ø & 8'' Ø with EXTENDED reach up to 70'**
Image for Model 94
EXTENDED REACH Extractor arms provide unsurpassed range of motion up to 70'. The extractor arm is based on the new parallelogram technology and 3 spring assisted joints give unsurpassed vertical movement. Cable, hoses, welding tools, etc., up to 50 kg (110 lbs.) can be suspended from the horizontal arm.
(01-02) E-Z ARM - Sparks & Abrasion to 14’ - Hybrid Support - 7'' Ø (900 CFM)* **
Image for Model 38
The EZ-ARM High Flow Extractor is an excellent solution for most medium to high volume extraction applications. The arm comes complete with Airflow Systems' patented friction release pawl-and-sprocket design.

This extraction arm engages positively when placed in its final position, yet offers no resistance when re-positioning is required.

A large 13” Ø inlet hood with 360° flange handle allows simple positioning of the hood (versus single handle designs).

This extractor comes in 3 lengths- 2m (7’), 3m (10’), 4m (14'), 6M (20'), 8M (26') - and 175mm (7”) diameter.

(01-03) E-Z ARM II - Bench or Desk Top to 8’ - Hybrid Support - 4'' Ø (300 CFM)**
Image for Model 79
4” Ø externally supported fume exhaust arms. Simple, effective and highly reliable devices used to remove smoke, fumes, dust and dirt away from the work area. Because the exhaust arms are easy to maneuver, they can command a large work area allowing coverage anywhere within the range of motion.

This extractor comes in 2 lengths; 1.5m (5’), and 2.5m (8’).

It can be extended up to 42' by adding the appropriate boom extensions.

This combination allows for high-volume collection with maximum reach.

A large 8” Ø inlet hood with 360° flange handle allow simple positioning of the hood (versus single handle designs).

(01-04) E-Z Arm Jr. - Lab & Bench Top to 6’ - Externally Supported - 2.5'' Ø (150 CFM)**
Image for Model 191
2.5" diameter high performance fume arm with external support joints. 3' or 5' long complete with angle cut nozzle. White tubes, hood and hose. (Does not include wall mounting bracket or motor/blower.)
(01-041) ME Lab & Bench Top - Externally Supported - 2'',3'',4'' Ø **
Image for Model 845
ME is a local extractor with friction joints designed for use in workplaces where great flexibility is required
e.g. laboratories and production environments in lighter industrial applications.


Standard version. Suitable for evacuation of most types
of airborne contaminants.


- PP version. Most suitable for evacuation of highly
corrosive contaminants in high concentrations.


- ESD version. For ESD environments, type approved to
EN 61340-5-1.


- ATEX version. For ATEX classed environments, as in
directive 94/9/EC category 2, for gases and dust.



Attachments
001 - Spec Drawings:
(01-042) TERFU Lab & Bench Top - Externally Supported - 2'',3'',4'' Ø
Image for Model 843
TERFU is a local extractor with friction joints designed for use in workplaces where great flexibility is required
e.g. laboratories and production environments in lighter industrial applications.



Always easy to select the right product
Terfu is available in four versions:
- Standard version. Suitable for evacuation of most types
of airborne contaminants.


- PP version. Most suitable for evacuation of highly
corrosive contaminants in high concentrations.


- ESD version. For ESD environments, type approved to
EN 61340-5-1.


- ATEX version. For ATEX classed environments, as in
directive 94/9/EC category 2, for gases and dust.



(01-05) Pro-Flex - All Applications to 30’ - Externally Supported - Diameter & Flow to suit **
Image for Model 572
The externally supported PRO-FLEX Extraction Arm is a superior arm that comes complete with an advanced "parallelogram / counter balanced" design eliminating the need for continual adjustment of friction joints and allowing for unparalleled ease of use. The PRO-FLEX is an ideal solution for most "source-capture" applications. It is not just a stretched out extractor arm. Two ball-bearing mounted horizontal arms with disc-brakes give an excellent horizontal maneuverability. It is also specifically recommended for applications requiring an "easy to position" extractor that does not require constant adjustment.


Pro-Flex Extractor Crane is the optimal solution when you need to cover large work areas. It come in 28 different configurations:
  • Lengths: 3M (10') -- 4M (14') -- 5m (17’) -- 6m (20') -- 7m (23’) -- 8m (26’) -- 9 m (30’)
  • Diameters: 100mm (4”) -- 125mm (5”) -- 160mm (6.5”) -- 200mm (8”).
  • (01-06) Telescopic - Confined locations to 8’ - Hybrid Support - 4'' Ø (300 CFM) & 6'' Ø (600 CFM)**
    Image for Model 465
    The Telescopic Arms are well suited for work stations located against a wall. There are no obstructions inside the hose, improving airflow through the arm and simplifying cleaning and maintenance. The Telescoping Arms are easily adjusted and have 360º rotation at the base joint. Very versatile and user friendly. Telescoping Arms are designed to connect to new or existing ductwork, boom arms, or directly to Airflow collection and filtration units and is fastener free in the air stream.
    (01-08) Super-Max - Stainless Steel Extraction Arms7' 10' 14’ - Externally Supported - 4'' Ø (300 CFM), 6.5'' Ø (650 CFM) & 8'' Ø (1000 CFM)**
    Image for Model 43
    Stainless Steel Extraction arms with wall bracket. Parallelogram design. Steel hood with combined universal- and spinning-joint. Flameproof PVC hose 120mm, 160mm, 200mm (5", 6.5”, 8") Ø* with internal steel spiral. Adapted for central or individual extraction fan.
    (01-09) H-MAX - Arm Extensions to 30’ - Externally Supported - 6.5'' Ø (650CFM) & 8'' Ø (1000 CFM)**
    Image for Model 567
    The H-MAX Extension Boom is used to support single extraction arms in applications where you need to reach over long distances. The H-MAX Extension Boom has a ball bearing articulation in the wall bracket which enables a 180º movement.
    (01-099) Mini-FLEX D. 3inch, D. 4inch. Wall/Ceiling mounting 3ft 4ft 5ft long **
    Image for Model 866
    Soldering, Gluing and Laboratories
    Mini-Flex Extraction arms are designed to extract smoke, gas and light dust from soldering, grinding, gluing and laboratory work.
    (01-10) HERCULIAN Arm Extensions to 44’ - Externally Supported - 6.5'' Ø (650 CFM) & 8'' Ø (1000 CFM)
    Image for Model 446
    The HERCULIAN Articulating Extension Boom is designed to be used in applications where you need to reach over very long distances. The HERCULIAN Articulating Extension Boom can support any Pro-Flex Extraction Crane or H-MAX Articulating Extension Boom with a Flexi-I, Flexi-II or E-Z Arm at the end. The HERCULIAN Articulating Extension Boom has a ball bearing articulation in the wall bracket which enables a 180º movement.
    (01-11) Accessories for Extraction Arms - Extension brackets, hoses, hood extensions…**
    Image for Model 578
    Accessories for extraction arms such as:


  • Magnetic Nozzles
  • Hose extensions
  • Extension Hoods
  • Vehicle Exhaust accessories
  • Etc.




  • Products


    Dual magnet holder bracket

    (01-50) PKS Component System Arm: 2''Ø(100)/3''Ø(200)/4''Ø(300)/5''Ø(450)/6.5''Ø(750)/8''(1200)**
    Image for Model 84
    The new "PKS" component system arm is an advanced extractor that brings together high performance and easy of use to an extractor that can be customized to a multitude of applications depending on the diameter and reach demanded by a particular application. different hose types and diameters allows the engineer or system designer to select to correct type and diameter of hose according to the exact specification and "Duct Velocity" required by the application. In addition to this you can select an extractor with working radii (Extractor Arm Length) from 5' to over 40', the longest reach available on the market.
    Attachments
    001 - Spec Drawings:
    002 - Brochures:
    004 - Videos: