model_icon
(11-025) MPH-5 (500 CFM) **
500 cfm source capture mist collector with (3) MIST-PLUS ™ II main filter with (1) MERV14 pleated synthetic, washable filter. (17.5" x 18.5" x 3.75"). ½ HP 115/1/60 Hz (7.2/3.6 amps) 71 dB, with rubber vibration isolator, or 208-230/460/3/60 Hz (2.6-2/1 amps), with a 8" COLLAR ON BOTTOM. 16 ga. Welded steel cabinet with powder-coat finish. Includes a top filter access door, Ultra-Seal ® filter mounting system. An acoustically lined blower cabinet with access panel. Painted Gray with a 8" inlet collar on the bottom. 1 phase units with 6' power cord and lighted rocker switch. 3 phase units wired to a junction box; circuit and motor overload protection by others.
001 - Spec Drawings:002 - Brochures:
Main System / Part
Part # Description
MPH5 500 cfm source capture mist collector with (3) MIST-PLUS II main filter. ½ Hp 115/1/60 Hz (7.2/3.6 amps) 71 dBA, with rubber vibration isolator.
  • Grey Colour
  • Inlet underneath the unit
  • 115V motor AS PER CANADIAN LAW; this unit is electrically approved by CSA/ESA field evaluation.
  • Filter Options (when ordering with main unit)
    Part # Description
    2AF8-4550 MIST-PLUS ™II filter, metal frames.
    MPH-5-7FJ9-9004 HEPA, 99.97% filter. (18 x 19 x 4). (1) Required.
    Variable Frequency Drives
    Part # Description
    VFD-KIT-1HP-115-230-3 1HP 120-240V Hybrid VFD 1 Phase In, 230V 3 Phase Output 60Hz complete with:

  • VFD NEMA 4
  • 1 HP Motor
  • Wiring
  • Labor
  • Re-certification

  • PLEASE NOTE: this kit is only required when upgrading a 120V system with a VFD
  • VFD-KIT-2HP-115-230-3 2HP 120-240V Hybrid VFD 1 Phase In, 230V 3 Phase Output 60Hz complete with:

  • VFD NEMA 4
  • 2 HP Motor
  • Wiring
  • Labor
  • Re-certification

  • PLEASE NOTE: this kit is only required when upgrading a 120 or 220/1/60 V system with a VFD
  • VFD-KIT-3HP-220-230-3 3HP 240V Hybrid VFD 1 Phase In, 230V 3 Phase Output 60Hz complete with:

  • VFD NEMA 4
  • 3 HP Motor
  • Wiring
  • Labor
  • Re-certification

  • PLEASE NOTE: this kit is only required when upgrading a 120V system with a VFD
  • Misc. Options (when ordering main unit)
    Part # Description
    2KT8-4124 L type bracket kit for mounting mist collector to the wall (2 required)
    MPH 5-EXT-SIL External Silencer.
    MPH 5-HANGING-CRADLE Bracket/Frame, with gasket to hang unit from ceiling.
    MPH 5-HEPA (1) Internal 99.97% HEPA filter. (17.5 x 18.5 x 4). In addition to main MIST-PLUS ™ II filters.
    MPH 5-IA-FRONT Cover the bottom inlet, and install a 6 collar to FRONT ONLY of unit and install a drain loop, 1 x 3/4 reduce fitting with 3/4 copper p-trap pipe fittings and instructions. **For 8 collar use, 2KT84901**
    MPH 5-PG-5 0-5 Minihelic dial pressure gauge with AFS logo with mounting bracket, painted Gray. Specify Location or it will ship loose.
    MPH 5-PG-6 0-6 Magnahelic dial pressure gauge with AFS logo with and mounting bracket, painted Gray. Specify Location or it will ship loose.
    MPH 5-STAND-10'' Kit, 10 stand.
    Preventative Maintenance Pressure Gauges, etc. (when ordering main unit)
    Part # Description
    LEV-MC-PG-5 Pressure Gauge - complete with Wall, Ceiling or table mounting bracket and 0-5 pressure gauge. 3/16 inside diameter tubing ordered separately.
    PG-10 Pressure Gauge - complete with Wall, Ceiling or table mounting bracket and 0-10 pressure gauge. 3/16 inside diameter tubing ordered separately.
    Installation Accessories
    Part # Description
    ELEC-INSP Inspection of electrical equipment to CSA standards
    Replacement filters - (Quantity discounts available upon request)
    Part # Description
    2AF8-4900 Replacement Filter
    Charcoal-CP40 40" lb of CP Blend of chemisorbant and activated carbon blend.

  • Target Contaminants:
  • Hydrocarbons
  • VOC's
  • Oxides of sulfur
  • Formaldehyde
  • Nitric Oxide
  • Hydrogen Sulfide
  • Lower molecular weight aldehydes and organic acids
  • MPH-5-7FP1-4502 Filter pleated. (18" x 19" x 3.75"). MERV 14 efficiency. Synthetic, Washable. (1) Required.
    Spare Part (Call for quantity discount)
    Part # Description
    7BM1-1002 Motorized Impellar MPH1.5
     
    Other Industries / Processes
    As we understand that our products may need to be re-applied during their life span (+20 years), we have listed below other applications that this product can be used For. Before re-applying any of our solutions, please contact one of our representatives to confirm the suitability of your application.

    Aerospace - Surface Grinders
    Construction - Circular Saw
    Educational Facilities - Machine Shop
    Food & Beverage Manufacturing - Food Packaging Plant
    Machine Shop - Surface Grinder
    Machine Shop - Swing Grinder
    Marine - Deck Cleaning
    MetalWorking - Chip Collection
    MetalWorking - Mist Collection